harley davidson oil filter cooler installation instructions

download
2000 cH ROME 99 – 07 SOFTAIL MODELS #2001 CHROME 99 – 07 DYNA MODELS #2002 CHROME 99 – 07 FLT MODELS, flht, flhr, fltr #2005 black CHROME 99 – 07 SOFTAIL MODELS #2006 BLACK CHROME 99 – 07 DYNA MODELS #2007 black CHROME 99 – 07 FLT MODELS, flht, flhr, fltr #2020 REPLACEMENT OIL FILTER #’S: 2000, 2001, 2002, 2005, 2006, 2007 1. See Figure 1 to verify all Feuling components and the proper mounting bracket for your model 2. Wash, clean and inspect all new Feuling hardware, Including – off-set sandwich oil filter adapter, filter cooler housing and oil lines, use compressed air to blow dry the oil lines, fittings, threads and bolt holes. Use a tap and die if needed to clean threads. (On installation use lubrication on all fasteners and fittings) 3. Refer to the proper service manual for your model motorcycle & engine, for removal of engine oil and spin-on oil filter. Dispose of these items properly. 4. Clean engine case oil filter spigot and sealing surface thoroughly. 5. Install the clean Feuling off set oil filter sandwich adapter; both O-ring and gasket need to be assembled dry. 6. First install the inside half of the off-set oil filter adapter, O-ring side towards engine case filter mount. We recommend using a dab loctite on the 1″ lock nut. (See figure 2) It is recommend to mock up the sandwich adapter before torquing nuts and bolts to obtain desired orientation and proper clearance to engine case and frame rails. 7. Install the fittings and oil lines onto the outer half of sandwich adapter torque fittings to proper specs using thread sealant on the 1/8 NPT threads and engine oil on the -4 AN oil line fittings. 8. Complete installation of sandwich adapter, including the inner gasket. Finger tight the allen head bolts in an alternating sequence on both sides before final torque. Re-Torque the allen head bolts after the first heat cycle after installation and during every oil change.